CH2 Device Settings
From this setting category, all devices related parameters can be found here.
2-1 Network Configuration
> Network
Figure 2-1 network setting
Parameter Description:
WAN Setting:
Network Type: support “Fixed IP”;”DHCP”;”PPPOE”
IP Address: IP address
Default Gateway: Default gateway
DHCP Tag (option 60): input Vendor class identifier or not.
DHCP Tag (option 61): input Client identifier or not.
DNS Server1: Primary DNS Server IP network
DNS Server2: Secondary DNS Server IP network
VOIP VLAN: Enable VOIP VLAN or not. When enable VOIP VLAN, the
WAN port can be only accessed by VLAN. If it is required to manage the
VOIP VLAN ID(2-4096): VLAN ID Used
Note: the default WAN IP address is 10.1.1.3.
Dynamix 2504, Administrator can use LAN port instead.
Comments to this Manuals