Dynamix UM-S User Manual download pdf (Page 72)

G.shdsl Router User Manual 152

Configuration via Serial Console or Telnet with Manu

Driven Interface

Serial Console

Check the connectivity of the RS-232 cable from your computer to the serial port of ROUTER. Start

your terminal access program with VT100 terminal emulation. Configure the serial link with the

following value:

Parameter Value

Baudrate 9600

Data Bits 8

Parity Check No

Stop Bits 1

Flow-control No

Press the SPACE key until the login screen appears. When you see the login screen, you can

logon to Router.

Note: You have to use SPACE key. Pressing other keys does not work.

User: admin

Password:

*****

Note: The factory default user and passwords are both “admin”.

Telnet

Make sure the correct Ethernet cable is used for connecting the LAN port of your computer to

ROUTER. The LAN LNK indicator on the front panel shall light if a correct cable is used. Starting

your Telnet client with VT100 terminal emulation and connecting to the management IP of Router,

wait for the login screen appears. When you see the login screen, you can logon to Router.

User: admin

Password: *****

Note: The default IP address is 192.168.0.1.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 101 102

No comments

Dynamix UM-S User Manual Page 72