Dynamix UM-S User Manual download pdf (Page 91)

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual V003 90

----------------------------------------------------------------------

Command: write <CR>

Message: Please input the following information.

Are you sure? (y/n): y

----------------------------------------------------------------------

4.8 Reboot

To reboot the EFM modem, move cursor “ >> “ to reboot command and press enter.

----------------------------------------------------------------------

Command: reboot <CR>

Message: Please input the following information.

Do you want to reboot? (y/n): y

----------------------------------------------------------------------

Type “y” can start reboot operation.

4.9 Ping

Ping command can use to diagnose basic network connectivity of EFM modem. Move move

cursor to ping command and press enter.

The ping command sends an echo request packet to an address, and then awaits a reply. The

ping output can help you evaluate path-to-host reliability, delays over the path, and whether

the host can be reached or is functioning.

----------------------------------------------------------------------

Command: ping <ip> [1~65534|-t] [1~1999]

Message: Please input the following information.

IP address <IP> : 10.0.0.1

Number of ping request packets to send (TAB select): -t

Data size [1~1999]: 32

----------------------------------------------------------------------

There are 3 parameters for ping command:

IP address: The IP address which you want to ping.

Number of ping request packed to send, key TAB for further selection

Default: It will send 4 packets only

1~65534: Set the number of ping request packets from 1 to 65534

-t : It will continuous until you key Ctrl+C to stop

Data Size: From 1 to 1999

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 104 105

No comments

Dynamix UM-S User Manual Page 91