Dynamix DW-01Plus/S Gateway User Manual
- 29 -
3.1.1.2 More than one Dynamix DW-01Plus/S behind the same IP Sharing
Device
1. Assign an IP address to each Dynamix DW-01Plus/S using fixed address.
2. Enable the IP Sharing function for each set using following command.
Fixed IP Address – usr/config$ ifaddr –ipsharing 1 “public IP of IP Sharing”
3. Configure separate SIP port and RTP port for each set to prevent from port conflict.
For example, if set A uses the default settings (SIP port: 5060, RTP port: 16384),
you must change set B’s setting to SIP port equal to 5061 and RTP port equal to
26384 for instance.
Change SIP port – usr/config$sip –port 5061
Change RTP port– usr/config$sip –rtp 26384
4. Use the Port Forwarding or Port Redirection function provided by IP Sharing device
(Router). See following for example.
>Advanced setting > NAT setting > Port Redirection
Active Configuration
Items Service name Protocol Actual Port
Virtual IP Virtual Port Enable
1
1 UDP 5060 192.168.1.10
5060
V
2
2 UDP 16384 192.168.1.10
16384
V
3
3 UDP 16394 192.168.1.10
16394
V
4
4 UDP 5061 192.168.1.11 5061
V
5
5 UDP 26384 192.168.1.11 26384
V
6
6 UDP 26394 192.168.1.11 26394
V
7
--- 0 0 X
8
--- 0 0 X
9
--- 0 0 X
10
--- 0 0 X
Comments to this Manuals