Dynamix DW-01 User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Dynamix DW-01Plus/S Gateway User Manual
- 31 -
3.2 NAT mode (PPPoE)
Step 1. Set PPPoE mode, using [pppoe dve 1], input the user id & password
provided by your ISP, using [pppoe id pwd], reboot the device after
disconnection, using [pppoe reboot 1]
usr/config$ pppoe dve 1 (PPPoE used)
usr/config$ pppoe open (PPPoE open)
usr/config$ pppoe id [email protected] (PPPoE login account)
usr/config$ pppoe pwd 123 (PPPoE login Passowd)
usr/config$ pppoe reboot 1 (Enable)
Step 2. Set NAT function (Default NAT function is enable)
usr/config$ ifaddr -nat 1
For example:
usr/config$ ifaddr -print
Internet address information
LAN IP address : 192.168.123.123
WAN IP address : 192.168.13.71
Subnet mask : 255.255.248.0
Default gateway : 192.168.8.254
NAT enabled : ON
DHCP startup : OFF
SNTP : mode=1
server 168.95.195.12
time zone : GMT+8
cycle=1024 mins
IPSharing : no IPSharing device.
Primary DNS Server : 168.95.192.1
Secondary DNS Server : 168.95.1.1
usr/config$
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Comments to this Manuals

No comments