Dynamix DW-01 User Manual download pdf (Page 52)

Dynamix DW-01Plus/S Gateway User Manual

- 48 -

4.3.3 System Configuration

Click [System Configuration] in the navigation panel and open the [System

Configuration] Screen.

- Keypad DTMF Type: set DTMF type. User can select DTMF type Dynamix

DW-01Plus/S transmits.

- RFC2833 Payload Type: change RFC2833 Payload type. This is for special

request from the other site, if RFC2833 payload types of 2 sites are different, it

may cause some problem of connection.

- FAX Payload Type: Change FAX payload type of Dynamix DW-01Plus/S.

- Inter Digit Time: Set the DTMF inter digit time (second)

To set the duration (in second) of two pressed digits in dial mode as timed out. If

after the duration user hasn’t pressed next number, Dynamix DW-01Plus/S will

dial out all number pressed (The inter digit time range is 1~10 secends).

- Caller ID Type: Set Caller ID function. If user set disable, Dynamix

DW-01Plus/S won’t display caller ID on Phone set when if receive caller ID

information from remote site. User can also select caller ID type to be FSK,

DTMF or NTT according on which type your phone set supports.

- End of Dial Digit: select end of dialing key, e.g. set end of dial key as * button,

after finished pressing dialing number then press * will dial out.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

No comments

Dynamix DW-01 User Manual Page 52